
|
 DesertRacing.com > News Archives
Team HUMMER® Wins Again at BITD/TSC 'Vegas to Reno'

Crew Chief - Rob Henderson
Rob Henderson is a Plant Manager for a large printing company in Reno
and has been a key member of Team HUMMER since the 2001 Baja 1000,
when he first joined the desert racing program as a volunteer crew
member.
Rob is a native of Seattle, where he began his early career working
as a mechanic for a variety of auto dealerships after high school.
Eventually he wound up in Phoenix and attended DeVry Institute of Technology
where he studied electronics. Shortly after graduation, Rob moved to
Hawaii and took a position with a specialty automotive company preparing
Porsches and BMWs for road racing.
After a few years, Rob returned to Seattle and took a position with
a printing company, where he has been for the past 24 years. When the
company moved to Reno in the 90’s, Rob made the move with them.
Henderson, who recently celebrated his fiftieth birthday, first met
Rod Hall through a friend who was working for Rod at the time.
The two became friends and Rob joined Team HUMMER in 2001. He has
also worked with Rod giving tire seminars.
Recently he accompanied Hall to Australia to assist him with seminars
for Asian and Australian Michelin dealers Rob oversees the Team HUMMER
crew at the races and reports directly to team owner, Rod Hall. In
his spare time he enjoys motorcycling, fishing and snowmobiling, when
winter closes in.
Rob lives in Reno with his wife, Sally and has three children in
their early 20’s.
|
Reno, NV - October 8, 2005: On Thursday,
October 6, Team HUMMER gathered at the Gold Coast hotel, in Las Vegas for pre-race
tech inspection in the hotel’s reserve parking area. The trucks were well prepped
and tested for this event and were ready for Best in the Desert’s TSCO ‘Vegas
to Reno’ race. A new addition to Team HUMMER, led by John Chapman from the
GM Desert Proving Ground (DPG) in Mesa, Arizona arrived with the new H3 Class
3100 SUV in tow and ready for it’s competitive debut. Class 3100 is for stock
mini & mid-sized production SUV’s and the number assigned to the H3 for 2005
is 3111.
Working with Thad Stump at DPG, many lent a hand but the core
team of Doug Moore, John Chapman, David Williams & Dave Gerber have spent the
past few months building the H3 race truck and the quality of the finished
product was evident from the moment it arrived in Las Vegas. Team owner Rod
Hall had flown to Mesa on Monday, prior to the race, for some last minute adjustments
and to test the new truck. Rod was very excited about the new truck and the
way it handled. The next day however, Jason Miyamoto from Fox Shox, the man
in charge of the H3 Shock development program, flew out from San Diego with
the final set of shocks for the SUV. Rod was amazed at how much the new shocks
improved the handling capability of the truck, which he had previously thought
couldn’t have been much better. Encouraged by the easy ride offered by the
new MasterCraft seats, the upgraded Fox Shox, and the performance of the LightForce
HID lights, the veteran Hall announced that he would drive the entire 495 mile
distance of the ‘Vegas to Reno’ on Friday!
Working with Thad Stump at DPG, many lent a hand but the core
team of Doug Moore, John Chapman, David Williams & Dave Gerber have spent the
past few months building the H3 race truck and the quality of the finished
product was evident from the moment it arrived in Las Vegas. Team owner Rod
Hall had flown to Mesa on Monday, prior to the race, for some last minute adjustments
and to test the new truck. Rod was very excited about the new truck and the
way it handled. The next day however, Jason Miyamoto from Fox Shox, the man
in charge of the H3 Shock development program, flew out from San Diego with
the final set of shocks for the SUV. Rod was amazed at how much the new shocks
improved the handling capability of the truck, which he had previously thought
couldn’t have been much better. Encouraged by the easy ride offered by the
new MasterCraft seats, the upgraded Fox Shox, and the performance of the LightForce
HID lights, the veteran Hall announced that he would drive the entire 495 mile
distance of the ‘Vegas to Reno’ on Friday!
Chad Hall’s #8102 Team HUMMER H1 pickup needed quite a bit of
chassis work and the body was removed so crossmembers and suspension components
could be replaced. The rear shock mount, which was torn off and repaired in
the field during the ‘Nevada 1000’, was ground off and replaced using stronger
materials. Additionally, the ride height was lowered in the rear of the H1
to decrease the operating angle of the constant velocity joints which we believe
to be the reason for the recent outbreak of failures of the rear half-shaft
boots. Having passed all 3 trucks through the tech inspection process, we put
them on the trailer and headed for the starting line in Johnnie, about 70 miles
west of Las Vegas where the race would begin on Friday morning.
Named after “Indian Johnnie,” an old Paiute Indian guide who
led prospectors to a gold strike in the late 1800’s, Johnnie is a deserted
mining area located about 20 miles north of Pahrump in southwestern Nevada.
On most days, the only movement you’ll see in Johnnie is the occaisonal Roadrunner
darting across the dry riverbed running north into the Amargosa Valley but
on Friday morning, the landscape was alive with the sound of almost 200 race
vehicles staging for the start of Best in the Desert Racing Association’s TSCO ‘Vegas
to Reno’ race.

H2 Chief Mech. - Sam Cothrun
Our H2 Chief Mechanic is Sam Cothrun, owner of Samco Fabrication in
Reno, Nevada.
Sam is a 26 year-old native of Reno where he graduated from Wooster
High in 1997. When he was 14, Sam bought a 1972 Ford Bronco, which
he still uses for off-roading and rock crawling. He rebuilt the Bronco
and after high school went to work in a four-wheel drive shop. In 1998,
Sam was hired on at Rod Hall International, and worked on building
a series of highly modified HUMVEEs for the military. His attention
to detail and fabrication skills did not go unnoticed by Rod Hall and
Sam was invited to co-ride with him in the Y2K ‘Baja 2000’.
He has been chief mechanic on the Class 4100 team ever since and shares
time in the co-rider seat with Thad Stump.
In the following year Sam opened his own business, Samco Fabrication,
where he specializes in fabrication for pre-runners, 4WD vehicles and
rock crawlers. Sam designs, builds and installs roll cages, suspension
components, lift kits and does gear and locker installations. He also
preps the Team HUMMER H2 at his shop. To learn more about Samco Fabrication
online, visit www.samcofabrication.com. Sam has one sister and two
brothers.
One of his brothers, Wilbur, is also a Team HUMMER crew member and
is featured on the page four sidebar.
Sam lives in Sparks with his wife Christine and their two year-old
daughter, Isabel.
|
The #8102 H1 pickup was first off the line for Team HUMMER, with
the team of Chad Hall at the wheel and Dr. Cort Stoskoph in the second seat.
Everything was going well for the big HUMMER and Chad was moving through the
field for the first 100 miles and holding on to second place. Not too far in
front of him was the #8101 Ford V- 10 driven by Mesa, Arizona’s Greg Foutz,
who was also running trouble-free but Chad was running on his pace knowing
that there was still 400 miles to the finish just south of Reno. Just out of
Pit #4, (Scotty’s Junction), the H1, was running in the dust when it found
a ditch, breaking a left front half-shaft, requiring about 20 minutes for Chad & Cort
to replace on the side of the race course. About 20 miles out of Pit #5, (Cottontail)
the H1 suffered more downtime when a fuel filter apparently clogged while racing
across some very mountainous terrain. The truck has filters on a dual feed
which flows fuel from both sides of the fuel cell and was on a steep incline
leaning to the left when the engine stalled out. After replacing both filters
with no result, Chad was forced to conclude that the truck had run out of fuel,
although he should have had enough to go another 50 miles. In a pinch, the
diesel will fire up on automatic transmission fluid, so he poured in the two
spare quarts he had on board. Amazingly, the truck came to life, allowing him
to get over the hill and back on level ground where it ran all the way to the
pit. After blowing out the fuel lines between the filters and cell, the truck
was re-fueled and the problem did not re-occur! Unfortunately, the #8102 H1
pickup had lost another 40 minutes to the leader putting us an hour down with
320 miles left in the race...
Josh Hall got off the line in the #4103 Team HUMMER H2 SUV just
five minutes after Chad in the #8102 H1 and had passed Chad while he was dealing
with the Broken half-shaft just out of Scotty’s Junction. Co-riding with Josh
on this segment of the course was Thad Stump and the H2 was well in front of
the Class 4100 lead en-route to what he hoped would be his 7th consecutive
BitD race win. He was running a trouble-free race and cleared Scotty’s Junction
almost an hour ahead of second place Mark Stein in the #4101 Ford Exhibition
who had hit a ditch and was replacing rear suspension parts in Pit #3, just
north of Beatty.

H2 Mechanic - Wilbur Cothrun
Wilbur Cothrun, Sam’s older brother, is our H2 mechanic and
has been with Team HUMMER since 1998 when he went with the team to
a race to help out. Wilbur also helps Sam prep the H2 between races
and certainly the Cothrun Brothers unwavering attention to detail is
part of the reason the H2 has won seven consecutive BitD races.
Wilbur is a native of the Reno area and graduated from Wooster High
in 1993. He held various constuction jobs after high school, before
signing on with Cashman Equipment, the local Caterpillar dealer, where
he currently works as a Technical Trainer. Wilbur travels throughout
Northern Nevada training service technicians in the latest repair procedures
for Caterpillar products.
Like his brother Sam, Wilbur got his first vehicle at the age of
14, a 1952
Chevy pickup. He spent the next few years restoring the truck and
upgrading the drive train to include a small block V8. By the time
he got his driver’s license, he not only had a nicely restored
truck but he also knew how to fix it! Over the years, Wilbur has done
some drag racing as well as dirt bike riding in the hills above Reno.
He also enjoys going out with Sam to do some serious off-roading
in Sam’s Bronco.
Wilbur is currently preparing his 1998 Ford Mustang Cobra to compete
in the road racing series at the Reno/Fernly Raceway and plans to continue
to run his 52 Chevy pickup at the drags, as well.
Wilbur is 30 years-old and lives in Sparks with his wife, Jessica
and their two boys.
|
Team owner, Rod Hall, was the last Team HUMMER entry to start
the race at the wheel of the recently completed #3111 H3 SUV with John Chapman
in the second seat. Class 3100 has been dominated for years by the #3102 Ford
Explorer driven by Mike Falkosky of Ramona, CA, one of the sports finest competitors.
The veteran Hall, who had driven the truck for the first time only three days
earlier, started right behind the #8102 Exporer and was holding position until
they stopped at Pit #1 to give the new truck a once over to be certain everything
was in order. Hall was back in the hunt within a couple of minutes and passed
through Scotty’s Junction just 3 minutes behind Falkosky in the #3102 Explorer.
At Pit #7 (Tonopah), 100 miles further into the race, the H3 had dropped another
four minutes to the leader and the crew decided to adjust the torsion bars
at the next fuel stop, in Redlich, to increase the ride height which seemed
to be slowing them down over the rough terrain. By the time they made the adjustment,
Falkosky had built up a 14 minute lead with just under 200 miles to go and
Hall put the hammer down in an effort to catch him.
The #8102 H1 pickup had been running like the wind since sorting
out the fuel delivery problem and had just cleared Tonopah in second place
when Chad caught the pungent odor of gear oil. A quick roadside inspection
revealed that the front axle seals on both sides had backed our of the axle
housing. How, you might wonder, could this happen? Well, it seems that the
front axle housings were recently upgraded to the new Alpha units which have
pressed-in seals. Had we noticed this, we would have modified these housings
to accept a retaining clip to avoid just such a problem. Pressed-in seals are
not a problem under normal operating conditions but racing across the desert
at 95 MPH requires the addition of a retaining clip. Under the circumstances,
the only immediate solution the crew could offer was to pound the seals back
into the housings as best we could and add gear oil as necessary along the
way.
Josh Hall with Sam Cothrun now the co-rider in the H2, had built
up a one hour lead over the second place entry of Mark Stein
in the #4101 Ford Exhibition. Josh was in the process of extending his lead
when the left, front
shock overheated and decided to reject a seal just south of Pit #6 (Goldfield).
Since the parts necessary to repair the shock were in Redlich, all we could
do in Goldfield was to add oil to the shock and charge it with Nitrogen, which
we were able to borrow from the Stienberger/Jones Trophy Truck crew. At Tonopah
we repeated the process and made arrangements to meet a crew with the parts
we needed at Pit #8 (Millers), who were driving down from the pit trailer at
Redlich. Josh pulled into Millers and the chase crew wasted no time removing
the damaged shock while we waited for the truck to arrive with our parts. While
the H2 was in the pit, the crew put on the light bar and gave the truck a through
inspection. As Sam was installing the rebuilt shock, the H2 fell to second
place when Marc Stein drove by waving and honking his signature siren. After
having a one hour lead on him, the crew was a little agitated,
to say the least. Josh climbed behind the wheel and observed, “I already beat
him once! Now we just have to go out and beat him again.” By the time the Team
HUMMER H2 passed through Pit #11 (Luning), they had passed Stein and reclaimed
the lead for the
second time.
With no further problems, the crew started to gather at the finish
line, just south of Reno and the HUMMERs finished in the order they had started.
Second in Class 8100 and the first HUMMER to cross the line at 11:12 PM, Friday
evening was the #8102 Team HUMMER pickup driven by Chad Hall .
First in Class 4100 at 11:44 PM and the second HUMMER across
the finish line was Josh Hall driving the #4102 Team HUMMER H2 SUV . This is
the 7th consecutive BitD win for Josh and the H2 and he only needs to finish
the ‘Henderson 400’, in December to win the Class 4100 points championship.
Second in Class 3100 at 12:41 AM and only three minutes behind
the winner was Rod Hall in the #3111 Team HUMMER H3 SUV. The truck only needed
a torsion bar adjustment and had one flat tire as it came into the Pit #8.
Hall was happy with the debut performance of the new H3 and has asked me to
recognize the H3 team from the Desert Proving Grounds for the fine job they
did in building the race truck.
Thanks go to:
Thad Stump
Doug Moore
John Chapman
Matt Laramie
Dave Williams
Dave Gerber
Team HUMMER’s next race is the ‘Tecate/SCORE Baja 1000’,
November 17 – 20, 2005 which will start and finish in Ensenada, B.C.,
Mexico.
For more information, call or write:
Best In The Desert Racing Association
3475 Boulder Highway
Las Vegas, NV 89121
(702) 457-5775, (702) 241-6431 fax
www.bitd.com
|
|
 |